Vaping can offer numerous benefits. For one, it doesn’t involve burning, like in cigarette smoking, meaning there’s no smoke, ash, and tar production involved, allowing users to experience advantages such as better oral, skin, and respiratory health. Actually, one study shows that vaping is relatively safer than smoking.
Additionally, with vaping, you’ll be able to control the amount of nicotine. E-liquids these days come in varying nicotine levels, extending from zero to high. Having said that, it’s easier for users to control the nicotine that goes into their bodies. In general, most vapers are working their way down. For example, they begin with a high level of nicotine before opting for a zero-level nicotine e-juice or eliminating it completely.
But, for you to reap all the benefits of vaping and improve your overall experience, aside from choosing the right vape, proper maintenance and care are crucial. You need to make sure that your vape is in tip-top condition. If you don’t, this may result in a mishap, from something as minor as leakage to something as major as an explosion. Also, proper care will make your device last longer.
Nevertheless, in today’s post, you’ll find out some effective ways concerning vape maintenance and how you can make the most out of your vaping device. Keep on reading to learn more.
- Clean The Vape Tank
There are factors to be considered as to how often you should clean your vape tank, including the usage frequency, humidity, and temperature. For one, residues from your old juice can build up and thicken, and may leak toward the cracks and, eventually, result in stains. For more guides on how to use technology in your life look at SoftGoza.
Remember that this process can seriously affect your device’s coil and wick. And, during this time, sometimes, it may be too late to get rid of the stains. So, if you’re vaping on a regular basis, you should clean your vape once every two to three days. However, worry not because cleaning a vape tank isn’t as complicated as you think.
All you need to do is empty the tank and rinse the residue with warm water. This will allow you to enjoy a consistently good experience with your vape’s tank. On the other hand, if you want to make everything a lot easier, consider investing in a good-quality ultrasonic cleaner.
Aside from cleaning precious metals and jewelry, this cleanser can also be used in cleaning vape devices. While you don’t necessarily need to use an ultrasonic cleaner especially made for vape gear, you can actually use the ones that run for a ten-minute cycle. Simply fill it with water, place all the components of the vape tank inside, and, then, run until all parts are clean. You should also consider adding some drops of dishwashing liquid to the cleaner, although it’s not necessary. But, make sure to give your vape tank some proper rinse and allow it to dry.
- Regularly Change The Atomizers And Coils
With proper cleaning and maintenance, the atomizer of your device will most likely last for an extended period. But, you need to ensure that you’re changing or rebuilding the coils regularly.
How often you change the coils should depend the strength of your vaporizer and how often you use your vape. What’s more, it depends on the kinds of oils or juices you’re using. But, generally, if the hit from the vape begins to taste burnt or overly harsh, it’s the perfect time to change the coils.
There are two types of replaceable coils: coils for a rebuildable that requires vapes to wick and install, and a coil head for a tank enclosed in a tiny metal chamber containing an absorbent wick. And, please note that the methods used for both types are quite different.
- Rebuildable Coil
Stick coils will quickly suffer in vapor production and flavor. Fortunately, there are easy steps you can take to make your coils function as good as new without breaking the bank.
The first step is to eliminate the wick from the coils; obviously, you don’t want to see them burning. But, if the coils aren’t totally bad, doing a light dry burn can be of great help. All you need to do is pulse the fire button a couple of times or until you eliminate the remaining liquid. Allow them to cool down and then re-wick.
If you’ve done this for a lot of time, a dry burn may not do the trick; instead, follow the steps below.
- Eliminate the wicks from your coils.
- Lightly dry burn the coils and make sure not to allow them to glow excessively.
- Remove the atomizer from the mod.
- Place under the running water.
- Lightly brush them using a coil cleaning tool or toothbrush.
- Rinse again.
- Finish the process by performing a final dry burn to get rid of the remaining water droplets.
When brushing the coils, you can also use dishwashing liquid, but you need to thoroughly rinse them with hot water afterward.
- Replaceable Coil
A replaceable coil head featuring clearomizers and sub-ohm tanks can be cleaned, but it won’t revive it completely because of the existence of wicks.
Allowing your coils to soak and having them pass through water will help eliminate some residue, not all of it. Also, you’ll need to wait until the water evaporates completely, which usually takes some time.
But, if you really want to clean the coil heads, you can always consider the ‘soak and rinse method’. Here, you’ll need to:
- Allow the coils to soak in cheap vodka, ethanol, or vinegar for a couple of hours.
- Place the coils under the tap, and rinse them afterward.
- Rinse them again using distilled water.
- To force water into the wicking hold, you’ll need to blow some air on the coils’ open side.
- Set the coils aside and wait until the water completely evaporates.
If you want to speed up the process, you can use a heater or take advantage of the sun. After that, you’ll notice that the look of the wicks will improve. But, as a piece of advice, it’s best not to have higher hopes because you’ll still need to replace the coil heads eventually, regardless of how new they look. When this time comes, make sure to get your coils from a reputable supplier, like vaporizerchief.
- Make Sure The Battery Compartment Is Always Clean
The e-juice you’re using may get into the battery compartment of your vape. And, please note that it might cause a short circuit or cause a fire. After all, electricity and liquids aren’t a great combination.
So, keeping your battery compartment clean at all times is crucial. To make it possible, all you need to do is wipe it down using a piece of clean cloth every time you’re changing batteries. You need to ensure that all the connections are free of corrosion and are clean. Also, use the recommended batteries for the vape you’re using.
- Avoid Screwing The Atomizer, Tank, Or Clearomizer Tightly
When you screw the vape tank tightly, this may strip the screen. As a matter of fact, the moment you strip a screw, you’re preventing that screw from being unscrewed, and when it comes to a vape, this stops you from cleaning the tank and changing the coils. As a result, you’ll end up getting a new atomizer or a completely new device, which typically means additional expense.
- Get A Protection For Your Mod Or Vape Pen
It’s highly likely to break when you drop your vape pen, especially if the impact is substantial. The vape tank can crack, or cause the juice or oil to seep from it. This may get into the compartment of the battery, resulting in a shock or fire hazard.
But, by protecting your device, like getting a quality case, you’ll prevent your vape mod, e-cigarette, or vape pen from breaking when you drop it accidentally. Getting a case will also help in keeping all your vape essentials, such as extra coils, mouthpieces, e-juices, and atomizers or tanks, organized in one location.
- Use The Right Batteries
Keep in mind that batteries of all kinds aren’t made the same. As a matter of fact, even the same batteries can be different. So, it’s crucial that the batteries of your vape match. Also, make sure to get your batteries from a reliable vape store only.
Lithium-ion batteries, for instance, are specially made for flashlights, and they shouldn’t be used in a vape even though they have similar amperage.
Concerning the matching, you want to ensure your batteries suit as far as amperage goes, especially if your vape is using two or more batteries.
For instance, 18650 3000mAh and 18650 2500mAh work in the majority of vape devices. But, if yours is requiring two batteries, make sure the numbers match for your safety.
- Pay Attention To The Connection Points
Keeping the connection points of your vape clean is very important. In fact, it’s one of the usual places where grime and dirt accumulate. Since the vape tank is sitting above the device’s connector, it’s where residues from minor leakages and even evaporated can build up. This can affect your device’s electrical conductivity, which may result in a faulty vape.
After ensuring that the connectors are clean, check for proper positioning. For instance, the majority of devices, like a tank, come with spring-loaded pins that can be adjusted. Sometimes, such pins stick in a contacted placement. This, in turn, will prevent them from contacting one another. In case you notice this situation, you can utilize a small flat-head screwdriver and reposition the contact pin upward carefully.
- Always Keep The Mouthpiece Clean
If you want to get the best tasting hit possible, you’ll need to keep your mouthpiece clean at all times. In fact, it also helps in preventing the spread of bacteria and germs, especially if you’re allowing your friends to take a hit from your vaporizer. You have nothing to worry about because it’s easy to do. All you need to do is wipe the mouthpiece on occasion.
- Don’t Overheat Your Vape
When you’re using your device for a long period, it may heat up. On the other hand, if you continue vaping after your atomizer stops working, you may end up overheating your mod or battery.
So, the moment you feel a skin irritation or a burning sensation from your device, seek medical attention and stop using it immediately.
Make sure that your mod is cool. Both hot and humid areas won’t help the mod to cool down. Keep in mind that the mod should be hot to the touch when it’s adequately cooled.
- Use A Lower Watt Setting
When you’re vaping with a sub-ohm tank, you’re more likely to use a higher watt. But, know that using high wattage consistently may shorten the coil’s lifespan, not to mention that you need to top up juice more often. This is true if you chain vape or take many drags, with less time in between.
When vaping at a high watt, the liquid accumulated by the wick of the coil could be burning off more rapidly. The situation takes place when you take frequent and long drags since the metal coil doesn’t have any chance to cool down properly between hits, so it won’t be able to lubricate alone.
If you prefer vaping at a high power setting, it’s best that you invest in a coil that’s designed for high-wattage usage.
One of the best things you can do to maintain your investment is to keep your vaping device in good condition. Always keep in mind that quality vape gear isn’t cheap, especially if you need to buy all of them at once.
So, if you keep your device in good condition by cleaning and maintaining it correctly and carefully, it’ll surely last long and allow you to reap the benefits of vaping.
By following the ways mentioned above, you can rest easy, knowing that you can make the most out of your vape.